VLT® 7000 Booster
■ Factory settings
PNU Parameter Factory setting Range Changes 4-Setup Conversion Data
# description during operation index type
001 Language English Yes No 0 5
002 Active Setup Setup 1 Yes No 0 5
004 LCP copy No copying No No 0 5
005 Max value of user-defined readout 100.00 0-999.999,99 Yes Yes -2 4
006 Unit for user-defined readout No unit Yes Yes 0 5
007 Big display readout Frequency, Hz Yes Yes 0 5
008 Small display readout 1.1 Reference. Unit Yes Yes 0 5
009 Small display readout 1.2 Motor current, A Yes Yes 0 5
010 Small display readout 1.3 Power, kW Yes Yes 0 5
011 Unit of local reference Hz Yes Yes 0 5
012 Hand start on LCP Enable Yes Yes 0 5
013 OFF/STOP on LCP Enable Yes Yes 0 5
014 Auto start on LCP Enable Yes Yes 0 5
015 Reset on LCP Enable Yes Yes 0 5
016 Lock for data change Not locked Yes Yes 0 5
017 Operating state at power-up, local
control
Auto restart Yes Yes 0 5
MG.70.A1.02 - VLT is a registered Danfoss trademark
132
To Next Page
Loading...