VLT® 7000 Booster
■ Parameter settings
At the end of the Manual you will find an overview
of the parameters. Parameters 700-708 always
have to be set no matter what operating mode
is selected in parameter 700.
■ Quick menu 17 Par. 700 Cascade Mode
Par. 700 Cascade Mode
(CASCADE MODE)
Value:
1-14
✭ Mode no. 1
Function:
The cascade mode is chosen. Please refer
to the overview table for further explanation
of the different modes.
Description of choice:
Select mode number.
■ Quick menu 18 Par. 701 Pump combination
Par. 701 Pump combination
(PUMP COMBINATION)
Value:
Fixed lead pump control
✭ R73@100%
Alternating lead
pump control
✭ 2 PUMPS: R71-R74@100%
Function:
The combinations of pumps and their rated capacities
are selected in this parameter. In standard mode,
additional pumps can be either 100%, 200% or 300%
capacity relative to the lead pump. In Alternating lead
pump control only 100% capacity pumps can be used.
Description of choice:
Select the pump combination and capacities
from the choices offered. Selections #1-10 are
only for Fixed lead pump control and #11-13 for
Alternatingleadpumpcontrol.
MG.70.A1.02 - VLT is a registered Danfoss trademark
98
To Next Page
Loading...