Warning Dual supply
How to add the MCB 105 option:
• See mounting instructions in the beginning of section
Options and Accessories
• The power to the live part connections on relay terminals must be disconnected.
• Do not mix live parts (high voltage) with control signals (PELV).
• Select the relay functions in par. 5-40
Function Relay
[6-8], par. 5-41
On Delay, Relay
[6-8] and par. 5-42
Off Delay, Relay
[6-8].
NB! (Index [6] is relay 7, index [7] is relay 8, and index [8] is relay 9)
3 VLT AQUA Selection VLT
®
AQUA Drive Design Guide
70
MG.20.N5.02 - VLT
®
is a registered Danfoss trademark
3
To Next Page
Loading...
