3.19 Parameters: 18-** Data Readouts 2
18-36 Analog Input X48/2 [mA]
Range: Function:
0.000 * [-20.000 - 20.000 ] View the actual current measured at
input X48/2.
18-37 Temp. Input X48/4
Range: Function:
0 * [-500 - 500 ] View the actual temperature measured at
input X48/4. The temperature unit is based
on the selection in 35-00 Term. X48/4 Temp.
Unit.
18-38 Temp. Input X48/7
Range: Function:
0 * [-500 - 500 ] View the actual temperature measured at
input X48/7. The temperature unit is based
on the selection in 35-02 Term. X48/7 Temp.
Unit.
18-39 Temp. Input X48/10
Range: Function:
0 * [-500 - 500 ] View the actual temperature measured at
input X48/10. The temperature unit is based
on the selection in 35-04 Term. X48/10 Temp.
Unit.
18-60 Digital Input 2
Range: Function:
0 * [0 - 65535 ] View the signal states from the active digital
inputs. '0' = no signal, '1' = connected signal.
18-90 Process PID Error
Range: Function:
0.0 %* [-200.0 - 200.0 %]
18-91 Process PID Output
Range: Function:
0.0 %* [-200.0 - 200.0 %]
18-92 Process PID Clamped Output
Range: Function:
0.0 %* [-200.0 - 200.0 %]
18-93 Process PID Gain Scaled Output
Range: Function:
0.0 %* [-200.0 - 200.0 %]
Parameter Descriptions
VLT
®
AutomationDrive Programmming Guide
152 MG33ME02 - VLT
®
is a registered Danfoss trademark
3
3
To Next Page
Loading...
