Danfoss VLT AutomationDrive FC 302

130BE713.11
1
2
1 Control shelf must stay below this point 2 Control shelf must stay above this point
Illustration 12.6 Positioning the Control Shelf for Correct EMC Installation
Da2/Db2/Da4/Db4 Parallel Sy...
VLT
®
FC Series, D1h–D8h, Da2/Db2/Da4/Db4, E1h–E4h, J8/J9
254 Danfoss A/S © 02/2019 All rights reserved. MG94A502
1212