1 Fan transformer 9 Fan door cover
2 DC link inductor 10 Module heatsink fan
3 Top cover plate 11 Inverter module
4 MDCIC board 12 Panel connectors
5 Control card 13 DC fuse
6 SMPS fuse and fan fuse 14 Mounting bracket
7 Motor output bus bar 15 (+) DC bus bar
8 Brake output bus bar 16 (-) DC bus bar
Figure 2.8 Frame Size F18 Inverter Cabinet
Introduction
Instruction Manual
MG37A222 Danfoss A/S © Rev. 2014-02-07 All rights reserved. 13
2 2