Danfoss VLT AutomationDrive FC 302 Installation Manual

5.3 Local Control Panel Operation
53
5.3.1 Local Control Panel 53
5.3.2 LCP Layout 54
5.3.3 Parameter Settings 55
5.3.4 Uploading/Downloading Data to/from the LCP 55
5.3.5 Changing Parameter Settings 55
5.3.6 Restoring Default Settings 56
5.4 Basic Operational Programming
56
5.4.1 VLT
®
Low Harmonic Drive Programming 56
5.4.2 Commissioning with SmartStart 56
5.4.3 Commissioning via [Main Menu] 57
5.4.4 Asynchronous Motor Set-up 57
5.4.5 Permanent Magnet Motor Set-up 58
5.4.6 Automatic Energy Optimization (AEO) 59
5.4.7 Automatic Motor Adaptation (AMA) 60
5.5 Checking Motor Rotation
60
5.6 Local Control Test
60
5.7 System Start-up
60
6 Application Examples
61
6.1 Introduction
61
6.2 Application Examples
61
7 Status Messages
68
7.1 Status Display
68
7.2 Warning and Alarm Types
68
7.2.1 Warnings 68
7.2.2 Alarm Trip 68
7.2.3 Alarm Trip-lock 68
7.3 Warnings and Alarm Denitions - Adjustable Frequency Drive
69
7.4 Warning and Alarm Denitions - Filter (Left LCP)
78
7.5 Troubleshooting
83
8 Specications
86
8.1 Power-Dependent Specications
86
8.1.1 Line Power Supply 3x380–480 V AC 86
8.1.2 Derating for Temperature 89
8.2 Mechanical Dimensions
91
8.3 General Technical Data - Adjustable Frequency Drive
95
8.4 Fuses
102
Contents Installation Manual
MG37A322 Danfoss A/S © Rev. 04/2015 All rights reserved.

Danfoss VLT AutomationDrive FC 302 Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 302
Category	DC Drives
Language	English