Danfoss VLT AutomationDrive FC 302

3 = third from the left inverter module in F14
frame size.
4 = far right inverter module in F14 frame size.
5 = rectier module.
6 = right rectier module in F14 frame size.
WARNING 250, New spare part
A component in the adjustable frequency drive has been
replaced.
Troubleshooting
•
Reset the adjustable frequency drive for normal
operation.
WARNING 251, New typecode
The power card or other components have been replaced
and the type code has been changed.
Troubleshooting
•
Reset to remove the warning and resume normal
operation.
Status Messages Installation Manual
MG37A322 Danfoss A/S © Rev. 04/2015 All rights reserved. 77
7 7