6.7.1 Parameter Group 35-** Thermal Protection
Table 50: 35-1 - Temperature Sensor Type
Option Function
Selects which type of sensor is associated with the temperature sensor input on the smart card.
* None
PT100
Table 51: 35-2 - Temperature Trip Level
Range Function
* 40 ° 0–240 ° Sets the trip point for temperature protection. Use parameter 10-2 Temperature Scale to configure the tempera-
ture scale.
6.7.2 Parameter Group 36-** Pump Trip Action
Table 52: 36-10 - RTD/PT100 B
Option Function
Selects the soft starter's response to the protection event.
* Soft Trip and Log
Soft Trip and Reset
Trip Starter
Trip and Reset
Warn and Log
Log Only
Configuration
Installation Guide | Pumping Smart Card
AN279052730268en-000102 / 175R1183
28 | Danfoss A/S © 2018.10