Danfoss VLT MCD 600 User Manual

5.8
5.9
5.9.1
5.9.2
5.9.3
5.9.4
5.9.5
5.10
5.10.1
5.10.2
5.11
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.7.1
6.7.2
6.8
6.9
6.9.1
6.10
6.11
6.12
6.13
6.14
6.15
7
7.1
7.2
7.3
7.3.1
7.4
External Bypass Contactor 39
Motor Connection 39
In-line Installation, Internally Bypassed 40
In-line Installation, Externally Bypassed 40
Inside Delta Installation, Internally Bypassed 41
Inside Delta Installation, Externally Bypassed 41
Ground Terminations 42
Typical Installations 42
Internally Bypassed Installation 42
Externally Bypassed Installation 44
Quick Set-up 46
Set-up Tools 48
Introduction 48
Setting Date and Time 48
Command Source 31
Commissioning 48
Run Simulation 48
Load/Save Settings 49
USB Save & Load 50
Save and Load Procedure 50
File Locations and Formats 50
Auto-start/Stop 51
Network Address 51
Setting a Network Address 51
Digital I/O State 52
Analog I/O State 53
Serial Number & Rating 53
Software Versions 53
Thermistor Reset 53
Reset Thermal Model 54
Logs 55
Introduction 55
Event Log 55
Counters 55
Viewing the Counters 55
QR Code 55
AQ262141844215en-000401/175R1174 | 5Danfoss A/S © 2020.12
Contents
VLT® Soft Starter MCD 600
Operating Guide

Danfoss VLT MCD 600 Specifications

General

Brand	Danfoss
Model	VLT MCD 600
Category	Controller
Language	English