Danfoss VLT - MCD Bus Options - General Notes

VLT
®
Soft Starter Pocket Guide 45
All bus options have the ability to:
Control the soft starter•
Monitor the soft starter status•
Monitor the soft starter trip state•
Monitor the soft starter current (MCD3000 and MCD202 only)•
Monitor the soft starter thermal model overload temperature •
(MCD3000 and MCD202 only)
Danfoss WinMaster is a PC Windows based software which allows
control, monitoring and parameter management of soft starters on an
RS485 network.
The following information is a general guide to MCD3000 and MCD200
bus options. Refer to the relevant installation instructions and users
manual for more detail.
MCD Bus Options – General Notes