Danfoss VLT Pocket Guide

10 VLT
®
Soft Starter Pocket Guide
These duty ratings defi ne the load requirements, not the
starter capabilities. Starter capability is specifi ed separately
in User Manuals, Product Guides and WinStart. Use these
charts to select a soft starter for a particular application.
Normal Heavy Severe
MCD 201-007 18 17
Consult Danfoss
for suitability
MCD 201-015 34 30
MCD 201-018 43 36
MCD 201-022 48 40
MCD 201-030 60 49
MCD 201-037 74 65
MCD 201-045 85 73
MCD 201-055 100 96
MCD 201-075 146 120
MCD 201-090 171 142
MCD 201-110 200 165
MCD 202-007 18 17
Consult Danfoss
for suitability
MCD 202-015 34 30
MCD 202-018 43 36
MCD 202-022 48 40
MCD 202-030 60 49
MCD 202-037 74 65
MCD 202-045 85 73
MCD 202-055 100 96
MCD 202-075 146 120
MCD 202-090 171 142
MCD 202-110 200 165
Current Ratings

Danfoss VLT Specifications

General

Frequency	50/60 Hz
Enclosure	IP20, IP21, IP55, IP66
Series	VLT
Control Technique	Flux Vector Control
Output Voltage	0-Vinput
Control Method	Fieldbus
Communication Interface	PROFIBUS, CANopen
Protection Features	Overload, Overvoltage, Undervoltage, Short Circuit, Ground Fault
Cooling Method	Liquid Cooled
Storage Temperature	-25°C to +70°C
Relative Humidity	5-95% non-condensing
Altitude	Up to 1000m (3280ft) without derating, up to 4000m (13120ft) with derating
Operating Temperature	-10°C to +50°C (14°F to 122°F)