Danfoss VLT Pocket Guide

VLT
®
Soft Starter Pocket Guide 9
MCD3000
Soft start: Current limit, •
Current ramp, Torque control,
Torque boost
Soft stop: Timed voltage ramp, •
Pump control, DC brake, Soft brake
Motor protection: Thermistor, •
Motor overload, Phase imbalance
System protection: Phase rotation, •
Excess start time, Undercurrent,
Instantaneous overload
Metering: Current, motor •
temperature
Control option: Local pushbuttons •
plus remote inputs/outputs
Network communication: •
AP ASCII plus options for
DeviceNet, Modbus and Profi bus
Bypass: Dedicated terminals •
for external connection
MCD3000
Current: 7.5 kW ~ 800 kW @400 V•
Mains voltage: 200 ~ 690 VAC•
Supply frequency: 50/60 Hz•
Enclosure: 7.5 ~ 132 kW IP21, •
185 ~ 800 kW IP20
MCD 100
• Micro Soft Start Controller for
motors up to 11 kW
• Extremely robust SCR design with
heavy ratings as standard
• Unlimited number of starts per hour
• Contactor style design for easy
selection, installation and commis-
sioning
MCD 100
Current: 1.5 kW ~ 11 kW @400 V•
Mains voltage: 208 ~ 600 VAC•
Control voltage: 24 – 480 VAC/VDC•
Enclosure: 1.5 ~ 11 kW IP20•

Danfoss VLT Specifications

General

Brand	Danfoss
Model	VLT
Category	DC Drives
Language	English