Danfoss VLT Pocket Guide

54 VLT
®
Soft Starter Pocket Guide
This requires an MCD Profi bus Module which clips onto the side of the
MCD200 (Cat. No: 175G9001).
Notes:
A single Profi bus Module is required for each MCD200.•
Profi bus node address is selected using two rotary switches. •
Data rate is automatically detected.
Up to 31 Profi bus Modules can be used as Profi bus slaves •
on a single Profi bus DP network.
The Profi bus Module requires and external 24 VDC auxiliary supply.•
The MCD Profi bus Module is Profi bus tested and certifi ed.•
For more information on the MCD Profi bus Module, refer to the •
Installation Instructions (MG.17.Gx.02) at www.danfoss.com/drives.
MCD200
MCD
Profibus
Module
Standard
DB9
connection
Profibus DP
network cable
Cat. No: 175G9001
MCD200 Profi bus option

Danfoss VLT Specifications

General

Brand	Danfoss
Model	VLT
Category	DC Drives
Language	English