Danfoss VLT - MCD Soft Starter Features and Specifi Cations

8 VLT
®
Soft Starter Pocket Guide
MCD 201
Soft start/stop: •
Timed voltage ramp
Motor protection: not included•
System protection: •
not included
Metering: not included•
Start/stop control: via inputs or via •
optional controller
Network communication: optional•
Bypass: Internally bypassed•
MCD 202
Soft start: Current limit•
Soft stop: Timed voltage ramp•
Motor protection: •
Thermistor, Motor overload, Phase
imbalance
System protection: Phase rotation, •
Excess start time, Bypass overload &
Instantaneous overload
Metering: optional extra•
Start/stop control: via inputs or via •
optional controller
Network communication: optional•
Bypass: Internally bypassed•
MCD 201 and MCD 202
Current: 7.5 kW ~ 110 kW @400 V•
Mains voltage: 200 ~ 575 VAC•
Supply frequency: 45 ~ 66 Hz•
Enclosure: 7.5 ~ 55 kW IP20, •
75 ~ 110 kW IP00
MCD Soft Starter Features and Specifi cations