Dascom DC-8600 - Chapter 2. Installation; Installing Cards; Card Specifications

Dascom DC-8600 User Guide V1.0
23
CHAPTER 2. INSTALLATION
2.1 Installing Cards
Cards can be loaded automatically from the card cassette or manually from the manual feed
slot.
• The card cassette can hold a large quantity of cards making it convenient for mass or large-
scale printing.
• Feeding cards one-by-one manually is well-suited for printing cards with different features such
as magnetic stripe, or RFID mifare contactless cards.
2.1.1 Card Specifications
This printer supports CR-80 cards.
Dimensions：85.6mm × 54mm
Thickness: 0.48mm ～ 1.10mm
Types: blank card, magnetic stripe card, contact smart card, contactless smart card,
and pre-printed card.
 Non CR-80 cards may cause defective print results or become stuck or lodged in the
printer requiring service.
 Do not use the cards listed below:
- Previously printed cards
- Damp cards
- Cards containing foreign particles, such as glass or metal
- Embossed cards
- Cards contaminated with oil, grease or dirt
- Defective cards with damages ,cracks, broken corners, or bends
- Transparent Cards
- Cards with odd shapes that are not CR80 in size