Dascom DC-8600 - Replacing the Retransfer Film

Dascom DC-8600 User Guide V1.0
32
(5) Close the front cover to its
original position.
(6) Press the Right key when the LCD screen displays [Please press Right key].
2.3 Replacing the Retransfer Film
You should replace the retransfer film when the LCD shows [FILM END] warning. Care
should be taken not to contaminate the film in the replacement process.
You can check the unused amount of your ribbon/retransfer film.
→Refer Section 3.3 to get the unused amount of your ribbon/retransfer film.
When removing the film cartridge, do not touch the inside of the printer because it is
extremely hot. Read the safety instructions provided.
Approved retransfer film
Type
Description
Product Code
Transparent Retransfer Film
Transparent retransfer film
Security Retransfer Film
Customized retransfer film
(INTM) for security purposes.
Please contact your local reseller for ribbons not listed above.