Dascom DC-8600 - Replacing the Ribbon

Dascom DC-8600 User Guide V1.0
29
2.2 Replacing the Ribbon
Change the ribbon when the LCD prompts [RIBBON END] message.
Approved ribbons for this printer:
Type
Description
Product Code
YMCK Color Ribbon
YMCKH Color Ribbon
YMCKK Color Ribbon
Please contact your local reseller for ribbons not listed above.
 Direct touching contaminates the ribbon/retransfer film and causes
uneven print quality.
 Avoid touching the retransfer tape and film excessively when replacing
them.
 Using non-genuine products may cause poor print quality and printer
malfunction.
 Quality and reliability of the non-genuine products are not guaranteed.
 Even within the warranty period, fees may be charged on servicing the
printer using non-genuine products.
You can get the unused quantity of ribbon and retransfer film.
Refer Section 3.3 to get the unused amount of your ribbon/retransfer film.
LCD Panel operation or the Windows software driver provide an estimation of the remaining
ribbon/retransfer film that are sufficient for your current print job. The LCD displays the
[RIBBON END] or [FILM END] warnings when they close to running out.
Consume the ribbon/retransfer film as soon as possible after purchase.