Dascom DC-8600 - Page 71

58
Dascom DC-8600 User Guide V1.0
Card setup
Setup
Settings and details
Card Feed Mode
LEFT AUTO IN, RIGHT AUTO IN, RIGHT MANUAL IN,
CASSETTE AUTO IN
Std card exit
Sets the port for normal card to eject from the printer.
Error card exit
Sets the port for error card to eject from the printer.
Eject Face
Auto, Front Up, Back Up
Decurl Time(Front)
Corrects the bending of the front side of the card after
printing.
Decurl Time(Back)
Corrects the bending of the back side of the card after
printing.
Card Type
PVC , PET, PETG, Card 1(35,202), Card 2(35,207), Card 3
(20,202), the parameter of PVC, PET, PET-G is (20,197),
the parameter of card 1,2,3 is settable.
Card Thickness
Sets the appropriate transfer conditions to match
different card thicknesses.
Exact Temp Mode
Adjusts the upper limit of the transfer temperature.
Consumables setup
Setup
Settings and details
Ribbon Type
Lists the available ribbon type.
Film Type
Lists the available film type.
Rbn near end(%)
When the ribbon margin is set to a certain value, the LCD
prompts "Check the ribbon/transfer film margin".
Film near end(%)
When the film margin is set to a certain value, the LCD
prompts "Check the ribbon/transfer film margin".