Chapter 11: System Maintenance 113
Time Servers and the NTP Command
Disable NTP Service
To disable NTP service on a restorer, use the ntp disable operation. Available to
administrative users only.
ntp disable
Add a Time Server
To add a remote time server to NTP list, use the ntp add timeserver operation. Available to
administrative users only.
ntp add timeserver server_name
For example, to add an NTP time server named srvr26.yourcompany.com to the list:
# ntp add timeserver srvr26.yourcompany.com
Delete a Time Server
To delete a remote time server from the list, use the ntp del timeserver operation.
Available to administrative users only.
ntp del timeserver server_name
For example, to delete an NTP time server named srvr26.yourcompany.com from the list:
# ntp del timeserver srvr26.yourcompany.com
Reset the List to Multicast
To reset the time server list to the multicast mode, use the ntp reset timeservers
operation. Available to administrative users only.
ntp reset timeservers
Reset All NTP Settings
To reset the local NTP server to the defaults of multicast and enabled, use the ntp reset
operation. Available to administrative users only.
ntp reset
To Next Page
Loading...