The Config Command
54 DD400 Series Restorer User Guide
For example, to set the location description to row2-num4-room221:
# config set location “row2-num4-room221”
To check the operation, use the config show location command.
Change the Mail Server Hostname
To change the SMTP mail server used by the restorer, use the config set mailserver
host
operation. Administrative users only.
config set mailserver host
For example, to set the mail server to mail.yourcompany.com:
# config set mailserver mail.yourcompany.com
To check the operation, use the config show mailserver command.
Set a Time Zone for the System Clock
To set the system clock to a specific time zone, use the config set timezone operation. The
default setting is US/Pacific. See the appendix:
“Time Zones” on page 191 for a complete list of
time zones. For the change to take effect for all currently running processes, you must reboot the
restorer. The operation is available to administrative users only.
config set timezone zone
For example, to set the system clock to the time zone that includes Los Angeles, California, USA:
# config set timezone Los_Angeles
To display time zones, enter a category or a partial zone name. The categories are: Africa, America,
Asia, Atlantic, Australia, Brazil, Canada, Chile, Europe, Indian, Mexico, Mideast, Pacific, and US.
The following examples show the use of a category and the use of a partial zone name:
# config set timezone us
US/Alaska US/Aleutian US/Arizona US/Central
US/Eastern US/East-Indiana US/Hawaii US/Indiana-Starke
US/Michigan US/Mountain US/Pacific US/Samoa
# config set timezone new
Ambiguous timezone name, matching ...
America/New_York Canada/Newfoundland
To Next Page
Loading...