Display Status
152 DD400 Series Restorer User Guide
Bytes sent The total number of bytes sent by this side to the other side of the Replicator pair. For
the originator, the value includes backup data, replication overhead, and network overhead. For the
replica, the value includes replication overhead and network overhead. Use the value (and the next
value) to estimate network traffic generated by replication.
Bytes received The total number of bytes received by this side from the other side of the Replicator
pair. For the replica, the value includes backup data, replication overhead, and network overhead.
For the originator, the value includes replication overhead and network overhead. Use the value
(and the previous value) to estimate network traffic generated by replication.
Virtual bytes replicated The total number of bytes of backup data (before compression) replicated
since the last time the restorer file system was enabled.
Replica received stamp The date and time of the most recent records received.
Replica processed stamp The date and time of the most recent records processed.
Replica records remaining The number of file records received by the replica and not yet
processed.
Originator records remaining The number of file records created by the originator and not yet
sent to the replica.
Compressed data remaining New data on the originator that is not yet sent to the replica.
Display Status
To display Replicator configuration information and the status of replication operations, use the
replication status operation.
replication status
The display on an originator is similar to the following:
# replication status
Mode: originator
Partner: rep1-rep.company.com
Enabled: yes
Connection: connected since Tue May 11 15:27:36 2004
State: initialized
Replica lag:(hh:mm) 3:36
Mode The role of the restorer in the Replicator pair: originator or replica.
Partner The hostname of the other restorer in the Replicator pair.
Enabled The enabled/disabled state of replication on this restorer.
Connection The most recent connection (or disconnect) date and time for the Replicator pair.
To Next Page
Loading...