Chapter 5: Configuration Management 55
The Config Command
Display the Administrative Email Address
To display the administrative email address that the restorer uses for email from the alerts and
autosupport utilities, use the
config show admin-email operation.
config show admin-email
The display is similar to the following:
# config show admin-email
The Admin Email is: rjones@yourcompany.com
Display the Administrative Host Name
To display the administrative host from which you can log into the restorer to see system logs and
use system commands, use the
config show admin-host operation.
config show admin-host
The display is similar to the following:
# config show admin-host
The Admin Host is: admin12.yourcompany.com
Display the System Location Description
To display the restorer location description, if you gave one, use the config show location
operation. Administrative users only.
config show location
The display is similar to the following:
# config show location
The System Location is: bldg12 rm 120 rack8
Display the Mail Server Hostname
To display the name of the mail server that the restorer uses to send email, use the config show
mailserver
operation.
config show mailserver
The display is similar to the following:
# config show mailserver
The Mail (SMTP) server is: mail.yourcompany.com
To Next Page
Loading...