224 DD400 Series Restorer User Guide
host show
Display the list of systems that receive log messages and the state
of disabled or enabled.
list
List all of the files in the log directory with the date each file
was last modified and the size of each file. The files are:
boot.log
Kernel diagnostic messages generated during the
booting up process.
ddfs.info
Debugging information created by the file system
process.
messages
The system log, which is generated by restorer actions and
from general system operations.
perf.log
Performance statistics used by Data Domain support
personnel for system tuning. The output is not user-readable.
secure
Messages from successful logins, attempted logins, and
attempts to do operations for which a user does not have
permission.
space.log
Messages about disk space usage by restorer components and data
storage, and messages from the clean process. A space usage
message is generated every hour. Each clean instance creates
about 100 messages. The messages are in comma-separated-
value format with tags that you can use to separate out the disk
space or clean messages. You can use third-party software to
analyze either set of messages. The tags are:
CLEAN for data lines from clean operations.
CLEAN_HEADER for lines that contain headers for the
clean operations data lines.
SPACE for disk space data lines.
SPACE_HEADER for lines that contain headers for the
disk space data lines.
windows
Messages about CIFS-related activity from CIFS clients
attempting to connect to the restorer.
To Next Page
Loading...