Command Line Interface
8 DD400 Series Restorer User Guide
cifs Manages Common Internet File System backups and restores on a restorer and displays
CIFS status and statistics for a restorer. See
“CIFS Management” on page 135.
config Shows, resets, copies, and saves restorer configuration settings. See “Configuration
Management” on page 51.
disk Displays disk statistics, status, usage, reliability indicators, and RAID layout and usage.
See
“Disk Management” on page 91.
filesys Displays filesystem status and statistics. See “Statistics and Basic Operations” on
page 79 for details. Manages the clean feature that reclaims physical disk space held by deleted
data. See “Clean Operations” on page 83 for details.
help Displays a list of all restorer commands and detailed explanations for each command.
license Displays current licensed features and allows adding or deleting licenses.
log Displays and administers the restorer log file. See “Log File Management” on page 167.
ndmp Manages direct backup and restore operations between a Network Appliance™ filer and
a restorer using the Network Data Management Protocol Version 2. See
“Backup/Restore
Using NDMP” on page 157.
net Displays network status and set up information. See “Network Management” on page 115.
nfs Displays NFS status and statistics. See “NFS Management” on page 129 for details.
ntp Manages restorer access to one or more time servers. The default setting is multicast. See
“Time Servers and the NTP Command” on page 112.
replication Manages the Replicator for replication of backup data from one restorer to
another. See
“Replicator” on page 145.
route Manages restorer network routing rules. See “The Route Command” on page 125.
snmp Enables or disables SNMP access to a restorer, adds community strings, and gives
contact and location information. See
“SNMP Management and Monitoring” on page 161.
system Displays restorer status, faults, and statistics, enables, disables, halts, and reboots a
restorer. See
“The System Command” on page 101. Also sets and displays the system clock
and calendar and allows the restorer to synchronize the clock with an external time server. See
“Set the Date and Time” on page 103.
user Administers user accounts for the restorer. See “User Administration” on page 65 for
details.
To Next Page
Loading...