Graphical User Interface
10 DD400 Series Restorer User Guide
On the Restorer Summary page:
• The black bar at the top displays the restorer host name.
• The grey bar immediately below the host name displays the file system status, the number of
current alerts, and the system uptime.
• The left panel lists the pages available in the interface. Click on link to display a page.
• Below the list, find the current login, a logout button, and a link to Data Domain Support.
• The main panel shows current alerts and the space used by restorer file system components.
• The line at the bottom of the page displays the DD400 software release and the current date.
The page links in the left panel display the output from restorer commands that are detailed
throughout this manual.
Configuration Wizard gives the same system configuration choices as the config setup
command. See
“Login and Configuration” on page 29.
System Stats Opens a new window and displays continuously updated graphs showing system
usage of various resources. See
“Display Detailed System Statistics” on page 106.
Autosupport shows current alerts, the email lists for alerts and autosupport messages, and a history
of alerts. See
“Display Current Alerts” on page 71, “Display the Email List” on page 72, “Display
the Autosupport Email List” on page 77, and “Display the Alerts History” on page 72.
Admin Access lists available access services, whether or not a service is enabled, and every listed
hostname allowed access through each service. See
“Display Hosts and Status” on page 62.
CIFS displays CIFS configuration choices and the CIFS client list.
Disks shows statistics for disk reliability and performance and lists disk hardware information. See
“Display Disk Reliability Details” on page 98, “Display Disk Performance Details” on page 97,
and “Display Disk Type and Capacity Information” on page 93.
File System displays the amount of space used by restorer file system components. See “Display
File System Space Utilization” on page 81.
Licenses shows the current licenses active on the restorer. See “Display Licenses” on page 57.
Log Files displays information about each system log file.
Network displays settings for the restorer Ethernet ports. See “Display Interface Settings” on
page 121 and “Display Ethernet Hardware Information” on page 122.
NFS lists clients that have access to the restorer. See “Display Allowed Clients” on page 131.
SNMP Displays the status of the local SNMP client and SNMP configuration information.
System Properties shows the state of the six system fans. See “Display Fan Status” on page 104.
Users lists the users currently logged in and all users that are allowed access to the system. See
“Display Current Users” on page 66 and “Display All Users” on page 67.
To Next Page
Loading...