Data Domain DD400 Series - Start Cleaning

Command Changes
46 DD400 Series Restorer User Guide
Raid Group (ppart_1):(raid-100)(3.04 TB) - Status:
normal
Slot Disk State Additional Status
---- ----- ------------ -----------------
1 disk1 in use (dg0)
2 disk2 in use (dg0)
---- ----- ------------ -----------------
Spare Disks
None
Unused Disks
None
• disk show config Displays information similar to the following for each LUN.
- LUN is the LUN number used by the external storage system.
- Port WWN is the world-wide number of the port on the external storage system through
which data is sent to the restorer.
- Manufacturer/Model includes a label that identifies the manufacturer. The display may
include a model ID or RAID type or other information depending on the vendor string sent
by the external storage system.
- Firmware is the firmware level used by the external storage controller.
- Serial No. is the serial number of the external storage system.
- Capacity is the amount of data in a volume sent to the restorer.
system12# disk show config
Disk LUN Port WWN Manufacturer/Model
----- --- ----------------------- ------------------
disk1 0 50:06:01:60:30:20:e2:12 DGC RAID 3
disk2 4 50:06:01:60:30:20:e2:12 DGC RAID 3
----- --- ----------------------- ------------------
Firmware Serial No. Capacity
-------- -------------- --------
0216 APM00045001866 1.56 TB
0216 APM00045001866 1.56 TB
-------- -------------- --------
2 drives present.