DataCard CD800 User Manual

XPS Card Printer Driver User’s Guide 9
Install the Driver
The following instructions describe how to install the driver using either a USB or a network
connection. Most of the installation procedure is the same for either method; differences are
noted where necessary.
1. Plug in and power on the printer. Make sure that the cards and supplies are loaded correctly.
The LCD panel displays Ready when the printer is completely powered on.
Caution: If you are installing the driver with a USB connection, do not connect the
USB cable to the printer until instructed. If you start this procedure with the USB
cable connected, problems can result.
SD, CD, CE Series Printer
CR805 Retransfer Card Printer

DataCard CD800 Specifications

General

Print Resolution	300 dpi
Weight	12 lbs (5.4 kg)
Power Requirements	100-240 VAC, 50/60 Hz
Print Technology	Dye-sublimation
Card Capacity	100 cards (standard hopper)
Connectivity	USB
Card Size	CR80 (85.6 mm x 54 mm)
Operating System Compatibility	Windows
Card Thickness	0.020" - 0.040" (0.51 mm - 1.02 mm)