Datalogic Gryphon 4200 Series Quick Reference Guide

Troubleshooting
28 GRYPHON™ I GD4200
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Nothing happens
when the scan
button is pulled.
No power to the
reader.
Check system power.
Ensure power supply is
connected.
Interface or power
cables are loose.
Ensure all cable
connections are
secure.
LED comes on,
but bar code does
not decode.
Reader not
programmed for
correct bar code type.
Ensure reader is
programmed to read
the type of bar code
scanned. Refer to the
PRG for more
information.
Bar code label is
unreadable.
Check the label to
ensure it is not
defaced. Try scanning
another bar code type.
Distance between
reader and bar code
is incorrect.
Move reader closer to
or further from the bar
code.
Bar code is
decoded but not
transmitted to the
host.
Reader not
programmed for the
correct host type.
Scan the appropriate
host type bar code.
Refer to the PRG for
more information.

Datalogic Gryphon 4200 Series Specifications

General

Brand	Datalogic
Model	Gryphon 4200 Series
Category	Barcode Reader
Language	English