Cleaning Procedure
QUICK REFERENCE GUIDE
31
CLEANING PROCEDURE
Exterior surfaces and scan windows exposed to spills,
smudges or debris accumulation require periodic cleaning
to ensure best performance during scanning operations.
Follow the procedures described in this instruction sheet
to keep your Gryphon device in good operating condition.
Common Cleaning Solutions
The cleaners and disinfectants listed below are recom-
mended for use on Datalogic Disinfectant-Ready Enclo-
sures:
WARNING: Be sure to turn off power and unplug
the device from electrical outlet before cleaning.
CAUTION: DO NOT use abrasive pads or cleaning
agents.
PRODUCT CHEMICAL CONTENT
Sani-Cloth® HB,
Sani-Cloth® Plus,
Super Sani-Cloth®
Quaternary Ammonium Chloride solution
Hepacide Quat II Virucidal disinfectant cleaner
Alcohol Wipes 70% Isopropyl Alcohol
CaviWipes™
lsopropanol 10-20%; Ethylene Glycol
Monobutyl Ether 1-5%
Virex® 256
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; Didecyl Dimethyl Ammonium
Chloride
Formula 409® Glass and
Surface Cleaner
n-Alkyl Dimethyl Benzyl Ammonium
Chloride; n-Propoxypropanol
Windex® Blue lsopropyl Alcohol
Clorox® Bleach;
Clorox Healthcare Bleach
Germicidal Cleaner
Sodium Hypochlorite;
Sodium Hydroxide
Hydrogen Peroxide 3%
ProSpray™ Wipes
(Disinfectant towelettes}
0.647% o-phenylphenol;
0.070% o-benzyl-p-chlorophenol
100% Gentle dish soap and
water
To Next Page
Loading...
Need help?
General
