Datalogic Gryphon GBT4100 User Manual

Charging the Batteries
14 Gryphon™ I GBT4100
Replacing the Batteries
Use the following procedure to change the reader’s battery:
1. With a screwdriver, unscrew the battery cover screw.
2. Unplug the three screws securing the battery holder, and
unplug the white connector.
NOTE
Before proceeding, read “Battery Safety” on the
preceding pages. Datalogic recommends annual
replacement of rechargeable battery packs to
ensure maximum performance.
Connector
Screw
Screw
Screw

Datalogic Gryphon GBT4100 Specifications

General

Brand	Datalogic
Model	Gryphon GBT4100
Category	Barcode Reader
Language	English