Stand Detection
Quick Reference Guide 31
Stand Detection
The following labels control how the scanner behaves when it is
placed into a cradle or stand that has the hardware to support au-
tomatic stand detection.
Switch to Stand Mode:
Automatically switches the scanner to
Stand Mode when the scanner is placed in the stand.
Switch to Flashing:
Automatically switches the scanner to Flash
Mode when the scanner is placed in the stand.
Switch to Always On:
Automatically switches the scanner to Al-
ways On mode when the scanner is placed in the stand.
Ignore Autorecognition:
Disables mode switching when the scan-
ner is placed in a stand
.
Switch to Stand Mode
Switch to Flashing
Switch to Always On
Ignore Autorecognition
To Next Page
Loading...
