Programming
QUICK REFERENCE GUIDE
15
* Supports only the interfaces listed in the Country Mode feature description.
PROGRAMMING
The reader is factory-configured with a set of standard
default features. After scanning the interface bar code
from the Interfaces section, you can select other options
and customize your reader through use of the program-
ming bar codes available in the Gryphon I GFS4500 Prod-
uct Reference Guide (PRG).
Programming can also be performed using the Datalogic
Aladdin™ Configuration application, which is download-
able from the Datalogic website listed on the back cover
of this manual. This multi-platform utility program allows
device configuration using a PC. It communicates with the
device using a serial or USB cable and can also create con-
figuration barcodes to print.
Using Programming Bar Codes
This manual contains bar codes which allow you to recon-
figure your reader. Some programming bar code labels,
like "Resetting Product Defaults" on page 16, require only
the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Pro-
gramming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar code
again to accept your changes, which exits Programming
Mode and returns the reader to normal operation.
COUNTRY MODE (CONTINUED)
Country Mode = Switzerland*
Country Mode = United Kingdom
To Next Page
Loading...
