Datalogic Gryphon GFS4500 - Page 42

LED and Beeper Indications
32 GRYPHON™ I GFS4500
INDICATION LED BEEPER
Power-up
Upper LED flashes/
blinks on power-up,
however, this may be
too rapid to view. With
a USB interface, the
LED blinks until enu-
meration with the host
is completed.
Imager beeps four
times at highest fre-
quency and volume
upon power-up.
Good Read
Upper green LED
comes on for pro-
grammed time
(default).
LED behavior for this
indication is configu-
rable using Aladdin
utility.
One beep at current
frequency, volume,
mono/bi-tonal setting
upon a successful label
scan. It is also possible
to upload custom jin-
gles with Aladdin.
ROM Failure 200ms on / 200ms off
Imager sounds one
error beep at highest
volume for 200 mS.
Limited Scanning
Label Read
N/A
Imager 'chirps' six
times at the highest
frequency and current
volume.
Imager
Disabled
The LED blinks contin-
uously 100ms on / 900
ms off
N/A