Datalogic Gryphon GM4200 User Manual

LED CONTROL ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 105
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash its
green LED) upon successfully reading a bar code.
$CBPIN00

Indicate Good Read = After Decode
Indicate Good Read = After Transmit
$CBPIN01
$CBPIN02
Indicate Good Read =
After CTS goes inactive then active

Datalogic Gryphon GM4200 Specifications

General

Cables included	USB
Sustainability certificates	RoHS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Product color	White
Protection features	Electrostatic Discharge (ESD) protection
International Protection (IP) code	IP52
Wireless range	50 m
Operating frequency	433 MHz
Standard interfaces	RF Wireless
Connectivity technology	Wireless
Battery type	Built-in battery
Charging time	4 h
Input voltage	4.5 - 14 V
Battery voltage	3.6 V
Battery capacity	2550 mAh
Power source type	Battery
Number of reads per charge	80000
Number of batteries supported	1
Type	Handheld bar code reader
Sensor type	CCD
Scanner type	1D
Read rate (max)	400 reads/s
Scanner resolution	0.077 mm
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Light levels (direct sunlight)	0 - 130000 lx
Linear (1D) barcodes supported	GS1 DataBar
2D (matrix & stacked) barcodes supported	-
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	68 mm
Width	166 mm
Height	109 mm
Weight	235 g