BATCH FEATURES ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
203
Erase Batch Memory
When the scanner is configured in Manual Batch Mode, use the following bar code to
erase any labels stored in batch memory.
Erase Batch Memory
BatchClear
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in batch
memory.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
$CBTTD00
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 ms
$CBTTD05
$CBTTD0A
RF Batch Mode Transmit Delay =100 ms
RF Batch Mode Transmit Delay = 0.5 seconds
$CBTTD32
$CBTTD64
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay = 2.5 seconds
$CBTTDFA
To Next Page
Loading...
Need help?
General
Weight and Dimensions
