Datalogic Gryphon I GPS4400 Quick Reference Guide

Programming
14 Gryphon™ GPS4400
Resetting Product Defaults
If you aren’t sure what programming options are in your reader, or
you’ve changed some options and want your default settings
restored, scan the bar code below to reset the reader to its initial
configuration.
The product can also be restored to its original factory default set-
tings. Reference the PRG for this option, and for a list of standard
factory settings.
Aiming System
A number of options for customizing control of the Aiming System
are available. See the PRG for more information and programming
bar codes.
Defaults are based on the interface type. Be sure your reader
is configured for the correct interface before scanning this
label.
Restore Custom Default Settings
$P,HA00,P(CR)

Datalogic Gryphon I GPS4400 Specifications

General

Type	Fixed bar code reader
Sensor type	Laser
Scanner type	2D
Tilt reading angle	-180 - 180 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Input voltage	5 V
USB version	2.0
Standard interfaces	USB, RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Buzzer	Yes
Product color	White
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	73 mm
Width	121 mm
Height	107 mm
Weight	295 g