Need help?Do you have a question about the Datalogic Gryphon I GPS4400 and is the answer not in the manual?
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | Laser |
| Scanner type | 2D |
| Tilt reading angle | -180 - 180 ° |
| Pitch reading angle | -40 - 40 ° |
| Linear (1D) barcodes supported | - |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code |
| Input voltage | 5 V |
| USB version | 2.0 |
| Standard interfaces | USB, RS-232 |
| Connectivity technology | Wired |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Buzzer | Yes |
| Product color | White |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 73 mm |
|---|---|
| Width | 121 mm |
| Height | 107 mm |
| Weight | 295 g |
Defines the scope and structure of the Product Reference Guide.
Provides contact information and resources for technical assistance.
Step-by-step guide to connect and configure the reader for operation.
Guide to choosing and setting the reader's host interface type (RS-232, USB).
Instructions and bar codes for customizing reader settings.
Settings for RS-232, USB-COM, and USB Keyboard interfaces.
Customizable codes to identify barcode symbology types, configurable by set or individually.
Configures audio and visual feedback for good reads, power status, and errors.
Defines how the scanner operates, including trigger and timeout behaviors.
Configuration settings for all supported 1D barcode types.
Configuration settings for all supported 2D barcode types.
Lists specific commands for configuring serial and USB-COM interfaces.
Features for customizing scanned data, including prefixes, suffixes, and AIM IDs.
Lists all supported 1D and 2D barcode symbologies and their capabilities.
Lists common configuration parameters with their default values and page references.
Provides visual examples of common 1D barcode symbologies for reference.
Bar codes representing numbers for keypad input during configuration.
Scancode tables detailing control character emulation for USB keyboard platforms.
To Next Page
