Datalogic Gryphon I GPS4400 - Maxicode; Maxicode Enable; Disable; Maxicode Primary Message Transmission

Enter/Exit Programming Mode 2D Symbologies
184 Gryphon™ GPS4400
MAXICODE
Maxicode Enable / Disable
Enables/disables ability of reader to decode Maxicode labels.
DEFAULT
$CMXEN00(CR)
Maxicode = Disable
$CMXEN01(CR)
Maxicode = Enable
Maxicode Primary Message Transmission
Enables/disables the transmission of only the Primary Message when the
Secondary Message is not readable.
DEFAULT
$CMXPT00(CR)
Maxicode Primary Message Transmission = Disable
$CMXPT01(CR)
Maxicode Primary Message Transmission = Enable