Datalogic Gryphon I GPS4400 - Code 32 Feature Setting Exceptions; Code 32 Check Char Transmission; Code 32 Start;Stop Character Transmission

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 109
Code 32 Feature Setting Exceptions
The following features are set for Code 32 by using these Code 39 set-
tings:
"Code 39 Quiet Zones" on page 105
"Code 39 Length Control" on page 105
"Trioptic Code" on page 108
Code 32 Check Char Transmission
Enable this option to transmit the check character along with Code 32 bar
code data.
DEFAULT
$CP3CT00(CR)
Code 32 Check Character Transmission = Don’t Send
$CP3CT01(CR)
Code 32 Check Character Transmission = Send
Code 32 Start/Stop Character Transmission
This option enables/disables transmission of Code 32 start and stop char-
acters
DEFAULT
$CP3SS00(CR)
Code 32 Start/Stop Character Transmission =
Don’t Transmit
$CP3SS01(CR)
Code 32 Start/Stop Character Transmission = Transmit
.