2D Symbologies Enter/Exit Programming Mode
Product Reference Guide
177
Aztec Code Set Length 2
This feature specifies one of the bar code lengths for Aztec Code Length Con-
trol. Length 2 is the maximum label length if in Variable Length Mode, or the
second fi
xed length if in Fixed Length Mode.
Characters can be set from
0001 to 3,832 characters in increments of 0001 (pad with zeros).
See page 241 for detailed instructions on setting this feature.
Select Aztec Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at le
ft followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing your
desired character(s). End by scan
ning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not sa
ve the entry string. You can then start again
at the beginning.
CANCEL
DEFAULT
Length 2 is 3,832 Characters
To Next Page
Loading...
