Datalogic Gryphon I GPS4400 User Manual

Enter/Exit Programming Mode Reading Parameters
76 Gryphon™ GPS4400
Decode Negative Image
Enables/Disables decoding a negative image for all symbologies. When
enabled, you cannot read normally-printed labels or programming labels in
this manual. Scan the “Disable” bar code below to return the scanner to its
default for this feature. To set the reader to decode only 2D codes, go to
"
2D Normal/Inverse Symbol Control" on page 174. For additional
options, see the Aladdin configuration application.
Unlike some programming features and options, Decode Negative Image
selections require that you scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code.
CAUTION
$P,CIPVR00,P\r
Decode Negative Image = Disable
DEFAULT
$P,CI$PVR01,P\r
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
Image Capture
For information and a list of options for Image Capture, use the Datalogic
Aladdin configuration application, available for free download from the Dat-
alogic website.

Datalogic Gryphon I GPS4400 Specifications

General

Type	Fixed bar code reader
Sensor type	Laser
Scanner type	2D
Tilt reading angle	-180 - 180 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, Micro QR Code, QR Code
Input voltage	5 V
USB version	2.0
Standard interfaces	USB, RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Buzzer	Yes
Product color	White
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	73 mm
Width	121 mm
Height	107 mm
Weight	295 g