What to do if the Datalogic Laboratory Equipment barcode is decoded but not transmitted to the host?
If the barcode is decoded but not transmitted to the host with your Datalogic Laboratory Equipment, the imager might not be programmed for the correct host type. In this case, scan the barcode that corresponds to the appropriate host type.
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | CCD |
| Scanner type | 1D |
| Read rate (max) | 270 reads/s |
| Optical sensor resolution | 2500 pixels |
| Linear (1D) barcodes supported | GS1-128 (UCC/EAN-128) |
| 2D (matrix & stacked) barcodes supported | - |
| Standard interfaces | RS-232, USB, Keyboard wedge |
| Connectivity technology | Wired |
| Product color | White |
| LED indicators | Yes |
| International Protection (IP) code | IP40 |
| Sustainability certificates | RoHS |
| Power consumption | 300 mA |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Cables included | USB |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 153 mm |
|---|---|
| Width | 152 mm |
| Height | 68 mm |
| Weight | 150 g |
Instructions for checking the scanner and accessories upon arrival.
Step-by-step guide for connecting and preparing the scanner.
Procedure for selecting and configuring the scanner's host interface.
Instructions for customizing scanner settings using programming bar codes.
Adjusting non-interface-specific settings like reading parameters.
Explains how to set parameters for interfaces, data, and symbologies.
Details for RS-232, Keyboard, and USB-OEM interface settings.
Covers global, data format, reading parameters, and symbology options.
Details for RS-232 specific parameters like baud rate and parity.
Covers wedge quiet interval, intercharacter delay, and intercode delay.
Explains data editing, prefix/suffix, AIM ID, and character conversion.
To Next Page
