6
SAFETY REGULATIONS
Read this manual carefully before performing any type of connection
to the Lynx PDA.
The user is responsible for any damages caused by incorrect use of
the equipment or by inobservance of the indication supplied in this
manual.
NOTE
GENERAL SAFETY RULES
− Use only the components supplied by the manufacturer for the specific
Lynx being used.
− Do not attempt to disassemble the Lynx PDA, as it does not contain parts that
can be repaired by the user. Any tampering will invalidate the warranty.
− When replacing the battery pack or at the end of the operative life of the
Lynx PDA, disposal must be performed in compliance with the laws in force in
your jurisdiction.
− Before using the devices and the battery packs, read chapter 2.
− Do not submerge the Lynx in liquid products.
− For further information, refer to this manual and to the Datalogic web site:
www.datalogic.com.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer which
supplies power directly to the Lynx or else be supplied by a UL Listed/CSA Certified
Power Unit marked “Class 2” or LPS power source rated 5 V, 1.8 A, which supplies
power directly to the Lynx via the power connector of the cable.
The package includes three international plug adapters. The adapters must be
plugged into the power supply before the power supply itself is plugged on the wall
outlet.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
