CONNECTIONS
3.5 WPAN CONNECTIONS
Lynx Bluetooth® models can communicate with a Bluetooth® device, such as a
printer, within a range of 10 m, using the on-board Bluetooth® module.
Key:
A) Lynx
B) Bluetooth® printer
In order to extend battery life, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par.
4.6.6), and perform the Discovery procedure (see par. 4.7.2).
Suspending the terminal powers off the Bluetooth® radio and drops
the piconet (Bluetooth® connection). When the terminal resumes, it
takes approximately 10 seconds for the Bluetooth® radio driver to re-
initialize the radio.
NOTE
Area coverage and Bluetooth® radio performance may vary, due to
environmental conditions or interference caused by other devices
(microwave ovens, radio transmitters, etc.).
NOTE
To Next Page
Loading...
