Datalogic Lynx - Clean Boot

1 LYNX™
46
4
Clean Boot
To perform a clean boot, do the following steps:
1. Perform a Warm Boot (see Warm Boot)
2. Before the splash screen appears, press and hold down the 0 and Telephone
End keys simultaneously:
A dialog box will appear asking for confirmation. Press the Enter Key to confirm. If
you wish to cancel the clean boot, press Esc by pressing Blue + Telephone End.
Warm Boot
Cold Boot
Clean Boot
Registry
Restored from
flash
Restored from
flash
Clean configuration (no user
config)
File
System
Preserved Preserved Clean Installation (no user files)