RSS Expanded Enable
Product Reference Guide 5-185
RSS Expanded 2D Component Enable
When this feature is enabled, the software will not decode an RSS
Expanded bar code with a 2D component associated with it, and the 2D
component will be discarded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
RSS EXPANDED 2D COMPONENT = DISABLE
RSS EXPANDED 2D COMPONENT = ENABLE
To Next Page
Loading...
