Quick Reference Guide 7
BEEPER
INDICATION
INDICATION COMMENT
Power On
Beep
Single beep
a
The Power-On LED indication is a con-
figurable feature which can be enabled
or disabled. When enabled, this beep
indicates the scanner has finished all
its power-up tests and is now ready for
operation.
Good Read
Indication
Single beep
a
The good read beep indication is config-
urable. Options include: Enable/dis-
able, frequency, duration and volume.
See the Product Reference Guide (PRG)
for more information.
Diagnostics
Varies (see
Error
Codes on
page 9 for
more informa-
tion)
The Beeper can provide diagnostic
feedback if the scanner discovers a
problem during SelfTest.
Programming
Mode
Indications
Varies depend-
ing upon the fea-
ture(s) being
configured.
The Beeper will sound as programming
bar code labels are scanned, indicating
progress during scanner configuration.
a. The Power On and Good Read Indication “beep” can also be config-
ured to use a WAV file. See the PRG for more information on pro-
gramming this feature.
To Next Page
Loading...
Need help?
General