Quick Reference Guide 9
Error Codes
If an error is detected, the scanner will sound a long low tone (for three
seconds) and flash its LED, indicating a failure. When this occurs, press
the Scanner button to hear the error code. If it is configured to do so, the
scanner will sound a series of beeps corresponding to the error code and/
or flash its LED simultaneous to the beeps.
NUMBER OF
LED FLASHES/
BEEPS
ERROR CORRECTIVE ACTION
1
Configuration
Contact Helpdesk for
assistance
2
Host Interface
6
Main PCB
10
Button Error
11
USB Device
13
CPLD ID
To Next Page
Loading...
