POWERSCAN
®
D8330/M8300/M8300-DK
CODE SELECTION (continued)
UPC A check digit transmission
enable
UPC E check digit transmission disable
enable ISBN and ISSN
check digit control and transmission
check digit control without transmission
check digit control and transmission
check digit control without transmission
Code 32
code length
check digit control and transmission
check digit control without transmission
check digit control and transmission
check digit control without transmission
check digit control and transmission
check digit control without transmission
check digit control and transmission
check digit control without transmission
CIP/HR
xxxx = ASCII numbers that define the code length where:
• First 2 digits = minimum acceptable code length.
• Second 2 digits = maximum acceptable code length.
The minimum code length must always be less than or equal to the maximum.
The maximum code length for all codes is 99 characters:
Examples:
0132 = variable length from 1 to 32 digits in the code.
1010 = 10 digit code length only.